Address

Saint-Gobain Gyproc Egypt

Head Office: Building #12B04 , Cairo Festival City , Second Floor, New Cairo - Egypt 

Al Ballah

"Al-Ballah" is a triditional gypsum binder extracted from Ballah quarry used for multi-application -non structural civil works- such as floor covering, additives for sand & cement mortars, marble fixing etc….

Usages:

floor covering as a protective layer

Marble fixing

Additives for sand & cement mortars to accelerate setting time

Key facts

fast setting stucco

Pre-mixed powder -only addition of water is required

economic

Application

Preparation

Substrate must be sound, free from dust, loose particles, cement laitance, curing compounds, oil, grease or any other contamination

Mixing

“Al-Ballah” is sprayed on water with the right ratios (Don’t add water to powder), then leave for 2 mins till it soaks completely. Stir the mix perfectly in all directions till reaching a homogeneous mortar with the convenient consistency for the application. It is preferred to use mechanical mixing

Application

After preparation and mixing, apply the Ballah for the required purpose

Extra information

Technical Data

Wet Density 1500 gm/l
PH Value neutral
Workability Time 3 - 5 mins
Initial Setting time 10 -15 mins
%  Mixing water 75 - 80 %
Whiteness '≥86

Storage & Packing

'Pack (kg) 30.3
Packs / Ton  33
Storage Conditions Must be stored in a dry area away from the reach of humidity or any water source, preferably on wodden pallets and covered with impermeable cover to mainatain a steady quality the longest duration possible
Storage Validity 3 months

 

Multi-purpose fast setting gypsum binder

Customer Service Hot Line 19230

We use cookies to ensure that we give you the best experience on our website. if you continue without and close this layer, we'll assume that you are happy to receive all cookies from us, if you want to get more information, please refer to our dedicated page about our cookies