Saint-Gobain Gyproc Egypt

Head Office: 94, Tahrir St. 2nd Flr
Maghrabi Plaza, Dokki, Giza , Egypt

Gyproc Standard Access Panel

Non-fire rated standard aluminum access panel with plasterboard facing providing easy access to plasterboard ceilings . Each panel features a push-catch closing mechanism with door retaining safety cable and hook.

Key facts

Width mm

 Length mm 

Weight kg* 

Door Material

600 600 5.9 Gypsum Board
600 1200 14.0

Gypsum Board



Suitable for applications where acoustic and fire rated levels are specified.

Installation instructions:

  • Remove the door from the frame.
  • Create an aperture within the Gyproc plasterboard wall or ceiling by drawing around the inner rim of the access panel frame. Allow an extra 5mm.
  • Cut aperture using a plasterboard saw and install the frame in the ceiling or wall.
  • Ensure frames are set square into ceiling aperture. Fix frame through face of plasterboard using 25mm Gyproc Drywall Screws (minimum of 2 fixings per side and a maximum of 300mm centers).
  • For a secure fix provide additional MF5/GA1 framing fixed back to the MF ceiling framework around the aperture.
  • Refit door into frame and check operation prior to finishing Remove the door.
  • Using and door Gyproc Tapes and Gyproc Jointing Compound finish around fitted frame and door in accordance with Gyproc plasterboard guidelines (outlined in the finishing section of this document or the Middle East WHITE BOOK) and decorate.
  • Ensure all jointing material has been removed from the frame and door edge as this this will affect the door’s operation.

Related products

Gyproc Standard Access Panel can be used with the following products

Customer Service Hot Line 19230

We use cookies to ensure that we give you the best experience on our website. if you continue without and close this layer, we'll assume that you are happy to receive all cookies from us, if you want to get more information, please refer to our dedicated page about our cookies